1Regulation (EU) 2024/1610 of the European Parliament and of the Council of 14 May 2024 amending Regulation (EU) 2019/1242 as regards strengthening the CO2 emission performance standards for new heavy-duty vehicles and integrating reporting obligations, amending Regulation (EU) 2018/858 and repealing Regulation (EU) 2018/956Text with EEA relevance.
32024R1610
European Union
§ Article 3
Article 3, point (29), of Regulation (EU) 2017/2400
Article 3, point (31), of Regulation (EU) 2017/2400
Article 3, point (4a), of Regulation (EU) 2017/2400
Manufacturer’s record file (MRF), Article 3, point (23), of Regulation (EU) 2017/2400
Vehicle information file (VIF), Article 3, point (25), of Regulation (EU) 2017/2400
§ Article 2
Article 2, point (5), of Implementing Regulation (EU) 2022/1362
Manufacturer’s record file (MRF), Article 2, point (9), of Implementing Regulation (EU) 2022/1362
§ Article 8
Article 8(6) and (7) of Implementing Regulation (EU) 2022/1362
Additional Information:
Vehicle categories/vehicle sub-groupsReportersPrimary vehicle manufacturerInterim vehicle manufacturerVehicle manufacturerDesignated technical serviceN/allNot applicableNot applicable
MRF
Additional information
Not applicableM/all
VIF
MRF
Additional information
of the primary vehicle
Not applicable
VIF
MRF
Additional information
of the complete or completed vehicle
Not applicableO/allNot applicableNot applicable
MRF
Additional information
MRF
Additional information
Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (OJ L 167, 25.6.2011, p. 1).
NoMonitoring parameterSourceVehicle categories to which the monitoring parameter applies15Make (trade name of manufacturer)All24Name and address of transmission manufacturerPoint 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
25Make (trade name of transmission manufacturerPoint 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
32Name and address of axle manufacturerPoint 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
Category O;
33Make (trade name of axle manufacturer)Point 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
Category O;
39Name and address of tyre manufacturerPoint 1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
Category O;
40Make (trade name of tyre manufacturer)Point 3 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400
Category N;
Category M: primary vehicle only;
Category O;
72Number of licence to operate the simulation toolAll75CO2 mass emission of the engine over WHTC (8) (g/kWh)Point 1.4.2 of the addendum to Appendix 5, or point 1.4.2 of the addendum to Appendix 7, to Annex I to Commission Regulation (EU) No 582/2011, whichever is applicable
Category N;
Category M: primary vehicle only;
76Fuel consumption of the engine over WHTC (g/kWh)Point 1.4.2 of the addendum to Appendix 5, or point 1.4.2 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable
Category N;
Category M: primary vehicle only;
77CO2 mass emission of the engine over WHSC (9) (g/kWh)Point 1.4.1 of the addendum to Appendix 5, or point 1.4.1 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable
Category N;
Category M: primary vehicle only;
78Fuel consumption of the engine over WHSC (g/kWh)Point 1.4.1 of the addendum to Appendix 5, or point 1.4.1 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable
Category N;
Category M: primary vehicle only;
101For heavy-duty vehicles with a date of simulation as of 1 July 2020, the type-approval number of the enginePoint 1.2.1. of addendum to Appendix 5, 6 or 7 to Annex I to Regulation (EU) No 582/2011, whichever is applicable
Category N;
Category M: primary vehicle only;
102For heavy-duty vehicles with a date of simulation as of 1 July 2021, the comma separated values file of the same name as the job file and with an extension .vsum comprising aggregated results per simulated mission profile and payload conditionFile generated by the simulation tool referred to in Article 5(1), point (a), of Regulation (EU) 2017/2400 in its graphical user interface (GUI) versionAll
PART C: AIR DRAG VALUE (CDXA) RANGES FOR THE PURPOSE OF PUBLICATION IN ACCORDANCE WITH ARTICLE 13c
For the purpose of making the CdxA value specified in data entry 23 publicly available in accordance with Article 13c, the Commission shall use the ranges defined in the following table containing the corresponding range for each CdxA value:
RangeCdxA value [m2]Min CdxA (CdxA ≥ min CdxA)Max CdxA (CdxA < MaxCdxA)A10,003,00A23,003,15
A33,153,31A43,313,48A53,483,65A63,653,83A73,834,02A84,024,22A94,224,43A104,434,65A114,654,88A124,885,12A135,125,38A145,385,65A155,655,93A165,936,23A176,236,54A186,546,87A196,877,21A207,217,57A217,577,95A227,958,35A238,358,77A248,779,21
Annex
ANNEX V
Data reporting and management referred to in Articles 13a to 13c
- REPORTING BY MEMBER STATES
1.1.
The data specified in Part A of Annex IV shall be transmitted in accordance with Article 13a by the contact point of the competent authority via electronic data transfer to the European Environment Agency.
The contact point shall notify the Commission and the European Environment Agency when the data are transmitted by email to the following addresses:
and
- REPORTING BY MANUFACTURERS
2.1.
Manufacturers shall, without delay, report to the Commission the following information:
(a) the manufacturer’s name as indicated in the certificate of conformity or individual approval certificate;
(b) the World Manufacturer Identifier code (WMI code) as defined in Commission Regulation (EU) No 19/2011
Commission Regulation (EU) No 19/2011 of 11 January 2011 concerning type-approval requirements for the manufacturer’s statutory plate and for the vehicle identification number of motor vehicles and their trailers and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (OJ L 8, 12.1.2011, p. 1).
to be used in the vehicle identification numbers of new heavy-duty vehicles to be placed on the market;
(c) the contact point responsible for uploading the data to the European Environment Agency.
They shall notify the Commission without delay of any changes to that information.
The notifications shall be sent to the addresses referred to in point 1.1.
2.2.
The data specified in Part B, point 2, of Annex I shall be transmitted in accordance with Article 13b by the contact point of the manufacturer via electronic data transfer to the European Environment Agency.
The contact point shall notify the Commission and the European Environment Agency when the data are transmitted by email to the addresses referred to in point 1.1.
- DATA PROCESSING
3.1.
The European Environment Agency shall process the data transmitted in accordance with points 1.1 and 2.2 and shall record the processed data in the register.
3.2.
The data relating to heavy-duty vehicles registered in the preceding reporting period and recorded in the register shall be made public by 30 April each year, with the exception of the following data entries:
3.2.1.
vehicle identification number;
3.2.2.
name and address of the transmission manufacturer;
3.2.3.
make (trade name of transmission manufacturer);
3.2.4.
name and address of axle manufacturer;
3.2.5.
make (trade name of axle manufacturer);
3.2.6.
name and address of tyre manufacturer;
3.2.7.
make (trade name of tyre manufacturer);
3.2.8.
engine model;
3.2.9.
transmission model;
3.2.10.
retarder model;
3.2.11.
torque converter model;
3.2.12.
angle drive model;
3.2.13.
axel model;
3.2.14.
air drag model;
3.2.15.
comma separated values file of the same name as the job file and with an extension .vsum comprising aggregated results per simulated mission profile and payload condition.
3.3.
Where a competent authority or a manufacturer identifies errors in the data submitted, it shall without delay notify the Commission and the European Environment Agency by submitting an error notification report to the European Environment Agency and by email to the addresses referred to in point 1.1.
3.4.
The Commission shall, with the support of the European Environment Agency, verify the notified errors and, where appropriate, correct the data in the register.
3.5.
The Commission, with the support of the European Environment Agency, shall make available electronic formats for the data transmissions referred to in points 1.1 and 2.2 in due time before the transmission deadlines.
Annex
ANNEX VI
Correlation table
Regulation (EU) 2018/956This RegulationArticle 1Article 1(2)Article 2Article 2Article 3Article 3Article 4Article 13aArticle 5Article 13bArticle 6Article 13cArticle 7Article 13dArticle 8Article 13eArticle 9Article 13fArticle 10—Article 11Article 14Article 12Article 16Article 13Article 17Article 14—Annex IAnnex IVAnnex IIAnnex V’.
Metadata
- Type
- Forordning
- År
- 2024
- Ikrafttrædelsesdato
- 1. januar 1970