Commission Implementing Decision (EU) 2022/405 of 3 March 2022 amending Implementing Decision (EU) 2019/1956 as regards harmonised standards for cover plates and cover tapes, luminaires, electrical accessories, powertrack systems, circuit breakers, electrical equipment for measurement, control, and laboratory use, and resistance welding equipmentText with EEA relevance.

Article 1, point (b), shall apply from 10 September 2023.

Done at Brussels, 3 March 2022.

For the Commission

The President

Ursula von der Leyen

Annex

ANNEX I

In Annex I to Implementing Decision (EU) 2019/1956 the following rows are added:

NoReference of the standard101.

EN IEC 61010-2-034:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

EN IEC 61010-2-034:2021/A11:2021

1. EN 50520:2020

Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations

EN 50520:2020/A1:2021

1. EN 60898-2:2021

Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation

1. EN IEC 61010-2-051:2021

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

EN IEC 61010-2-051:2021/A11:2021

1. EN IEC 61010-2-061:2021

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

EN IEC 61010-2-061:2021/A11:2021

1. EN IEC 61010-2-030:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-030: Particular requirements for equipment having testing or measuring circuits

EN IEC 61010-2-030:2021/A11:2021

1. EN 60598-2-13:2006

Luminaires – Part 2-13: Particular requirements – Ground recessed luminaires

EN 60598-2-13:2006/A1:2012

EN 60598-2-13:2006/A11:2021

EN 60598-2-13:2006/AC:2006;

1. EN 61534-1:2011

Powertrack systems – Part 1: General requirements

EN 61534-1:2011/A1:2014

EN 61534-1:2011/A11:2021

EN 61534-1:2011/A2:2021

1. EN 61534-21:2014

Powertrack systems – Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

EN 61534-21:2014/A11:2021

EN 61534-21:2014/A1:2021;

1. EN 61534-22:2014

Powertrack systems – Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation

EN 61534-22:2014/A11:2021

EN 61534-22:2014/A1:2021

1. EN 62135-1:2015

Resistance welding equipment – Part 1: Safety requirements for design, manufacture and installation

EN 62135-1:2015/AC:2016

Annex

ANNEX II

Row 29 of Annex IB to Implementing Decision (EU) 2019/1956 is deleted.

Annex

ANNEX III

In Annex II to Implementing Decision (EU) 2019/1956, the following rows are added:

NoReference of the standardDate of withdrawal96.

EN 50520:2009

Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations

10 September 202397.

EN 60898-2:2006

Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation