Commission Implementing Decision (EU) 2019/1863 of 6 November 2019 amending and correcting Implementing Decision (EU) 2019/436 as regards the withdrawal of references of harmonised standards for machinery from the Official Journal of the European UnionText with EEA relevance.
32019D1863
European Union
§ Article 1
Article 1 shall apply from 19 March 2019.
Done at Brussels, 6 November 2019.
For the Commission
The President
Jean-Claude Juncker
Annex
ANNEX
Annex
ANNEX III
NoReference of standardDate of withdrawalType1.
EN 1037:1995+A1:2008
Safety of machinery — Prevention of unexpected start-up
19 September 2020B2.
EN 474-1:2006+A4:2013
Earth-moving machinery — Safety — Part 1: General requirements
Notice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
19 September 2020C3.
EN 1853:1999+A1:2009
Agricultural machinery — Trailers with tipping body – Safety
19 September 2020C4.
EN 1870-6:2002+A1:2009
Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
19 September 2020C5.
EN ISO 4254-5:2009
Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008)
19 September 2020C6.
EN ISO 4254-7:2009
Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)
19 September 2020C7.
EN 14017:2005+A2:2009
Agricultural and forestry machinery — Solid fertilizer distributors – Safety
19 September 2020C8.
EN ISO 5395-1:2013
Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)
19 September 2020C9.
EN ISO 5395-3:2013
Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
EN ISO 5395-3:2013/A1:2017
19 September 2020C10.
EN 12013:2000+A1:2008
Plastics and rubber machines — Internal mixers — Safety requirements
19 September 2020C11.
EN 12999:2011+A1:2012
Cranes — Loader cranes
19 September 2020C12.
EN 13001-3-1:2012+A1:2013
Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure
19 September 2020C13.
EN 13135:2013
Cranes — Safety — Design — Requirements for equipment
19 September 2020C14.
EN 13684:2004+A3:2009
Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety
19 September 2020C
- EN 15895:2011
Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools
19 September 2020C16.
EN 692:2005+A1:2009
Machine tools — Mechanical presses — Safety
19 September 2021C17.
EN 693:2001+A2:2011
Machine tools — Safety — Hydraulic presse
19 March 2021C18.
EN 13736:2003+A1:2009
Safety of machine tools — Pneumatic presses
19 September 2021C19.
EN 848-1:2007+A2:2012
Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines
19 September 2020C20.
EN 1710:2005+A1:2008
Equipment and components intended for use in potentially explosive atmospheres in underground mines
19 September 2020C21.
EN 50569:2013
Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors
12 January 2021C22.
EN 50570:2013
Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers
12 January 2021C23.
EN 50571:2013
Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines
12 January 2021C24.
EN 50636-2-107:2015
Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified)
12 January 2020C25.
EN 60335-1:2012
Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified)
EN 60335-1:2012/A11:2014
3 May 2020C26.
EN 60745-2-1:2010
Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008)
19 January 2022C27.
EN 60745-2-17:2010
Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified)
15 December 2021C28.
EN 62841-3-1:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
19 October 2019C
- EN 61029-2-4:2011
Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified)
24 June 2020C30.
EN 62841-3-6:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)
19 October 2019C31.
EN 62841-3-9:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified)
15 November 2019C32.
EN 62841-3-10:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified)
19 October 2019C33.
EN 13241:2003+A2:2016
Industrial, commercial, garage doors and gates — Product standard, performance characteristics
19 September 2020C34.
EN 786:1996+A2:2009
Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety
19 September 2020C35.
EN 1870-14:2007+A2:2012
Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines
19 September 2020C36.
EN 61496-1:2013
Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests
19 September 2020C37.
EN ISO 11200:2014
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
19 September 2020B38.
EN 1870-13:2007+A2:2012
Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines
19 September 2020C
Metadata
- Type
- Afgørelse
- År
- 2019
- Ikrafttrædelsesdato
- 1. januar 1970